One Set of Capabilities, Covering Your Product from R&D to Going Global
From R&D pre-compliance and pilot production verification to mass-production sampling, we use measured data from six major laboratories and frontline compliance experience to answer "does this product actually work"; we also turn that experience into product certification, cross-border compliance, training and consulting, helping teams think through problems before samples are submitted. Reports are verifiable on the official website; certification is performed by bodies with issuing qualifications; remediation support and liaison with certification bodies are completed on one line.
Testing · Certification · Global Compliance, Completed on One Line
Not sure which category to start with? Tell us your product and target market, and a consultant will help you prioritize.
Testing Services
Certification & Compliance
Testing Services
From R&D pre-compliance and pilot production verification to mass-production consistency sampling, we use measured data from six major laboratories to answer "does this product actually work." All reports are issued within the CNAS / CMA accredited scope.
Testing Items by Category
| Category | Typical Items | Common Standards | Applicable Products |
|---|---|---|---|
| Environmental Reliability | High/low temperature, temperature/humidity cycling, thermal shock, rapid temperature change, damp heat cycling, low air pressure | IEC 60068-2 / GB/T 2423 / QC/T 639 | Automotive electronics, consumer electronics, PCB, robot components |
| Climate Aging | Xenon lamp aging, UV aging, salt spray, cyclic salt spray, gas corrosion, ozone aging | ISO 4892 / ASTM G155 / GB/T 10125 | Interior & exterior trim, coatings, cable sheaths, structural parts |
| EMC | Radiated emission, conducted emission, radiated immunity, BCI, transient immunity, ESD, EFT burst, surge | CISPR 25 / ISO 11452 / IEC 61000-4 | Automotive modules, home appliances, industrial control, medical devices |
| Electrical Safety | Withstand voltage, insulation resistance, grounding resistance, leakage current, temperature rise, abnormal operation, ball pressure, glow-wire | IEC 62368 / IEC 60335 / IEC 60601-1 | Power supplies, terminals, home appliances, medical devices |
| Mechanical & Structural | Vibration, mechanical shock, bump, drop, road simulation transport, mating life, bending fatigue | IEC 60068-2-6 / ISTA Series / GB T 4857 | Connectors, robot joints, complete vehicle components |
| Chemical & Restricted Substances | RoHS phthalates, REACH SVHC, halogens, ELV restricted substances, packaging directive, California 65 | IEC 62321 Series / QC/T 941~944 / GB/T 26125 | All categories of electronics & electrical, automotive components |
| Materials & Physical-Chemical | Tensile, flexural, compression, tear, impact, hardness, melt flow rate, density, ash content, composition analysis | GB/T 1040 / ISO 527 / ASTM D638 / ISO 1133 | Polymer materials, metal materials, coatings |
| VOC & Odor | VOC value / FOG value, benzene series, formaldehyde, odor evaluation, fogging | VDA 277 / 278 / 275 / 3900 / GMW 15634 | Automotive interiors, automotive adhesives, seals |
| Batteries & Energy Storage | Capacity, rate discharge, cycle life, crush, nail penetration, thermal abuse, external short circuit, UN 38.3 | UN 38.3 / IEC 62133 / GB 38031 / IEC 62619 | Consumer batteries, power batteries, energy storage |
| PCB / PCBA | Appearance & dimensions, plating, solderability, X-Ray void rate, cross-section metallography, ionic contamination | IPC-A-600 / IPC-A-610 / IPC J-STD-001 | Single/double-sided boards, multilayer boards, HDI, PCBA |
| Food Contact Materials | Total migration, specific migration, evaporative residue, potassium permanganate consumption, decolorization, sensory | GB 4806 / GB 31604 / GB 9685 | Plastics, silicone, metal, ceramics, paper and coatings |
| Toys & Gifts | Small parts, sharp points & edges, tension & torque, flammability, heavy metal migration, phthalates, azo dyes | ISO 8124 / GB 6675 / EN 71 / ASTM F963 | Plastic / plush / electric toys, stationery & gifts |
Service Process
- 1Requirement CommunicationTell us your product, target market and schedule; a technical consultant helps select test items
- 2Plan & QuotationTesting plan and quotation within 1 business day, specifying standards, items and timeline
- 3Sample Submission & AcceptanceConfirm sample condition and delivery method; nearest scheduling between Shenzhen / Dongguan dual sites
- 4Test ExecutionTesting conducted per standards with immediate feedback on abnormal items — no pointless waiting
- 5Report IssuanceReport issued, verifiable on the official website
- 6Remediation & RetestRemediation suggestions for failed items, with priority scheduling for retests
TMC LAB provides full-process testing services from R&D pre-compliance and pilot production verification to mass-production sampling, with reports verifiable on the official website; for formal certification projects, we handle compliance pathway planning, remediation support and liaison with certification bodies.
Training & Consulting
Beyond testing, we also turn over a decade of frontline compliance experience into actionable training and consulting: from standard clause interpretation and test plan design to internal quality systems and supplier control recommendations — helping R&D and quality teams think through problems before samples are submitted.
Common Service Content
| Category | Content | Applicable Audience |
|---|---|---|
| Standards Interpretation Training | Clause-by-clause breakdown of standards for target markets (safety / EMC / wireless / environmental reliability, etc.), clarifying test purposes and criteria | R&D / Quality / Engineering |
| Compliance Pathway Planning | Based on product and target market, mapping out required test items and their sequence to avoid missed tests and duplicated investment | Project Managers / Product Owners |
| Remediation Technical Consulting | Actionable remediation directions and verification suggestions for items failing pre-compliance | Hardware / Structure / Quality |
| Supplier Control Recommendations | Quality control points for incoming materials and supply chain from a testing perspective | Procurement / SQE |
| Internal System Building | Assistance in establishing product compliance self-check lists and internal test specifications | Quality System Owners |
Service Process
- 1Requirement CommunicationTell us your product, target market and team pain points to determine the training or consulting direction
- 2Plan DesignTailored course outlines or consulting checklists with defined delivery format (online / on-site)
- 3Implementation & DeliveryTraining or consulting conducted as agreed, with takeaway materials
- 4Follow-Up SupportContinued online Q&A for problems in subsequent testing
Training and consulting are based on real cases from TMC LAB's frontline testing — implementation-focused, with no empty theory; for formal certification issuance matters, we handle compliance pathway planning and liaison with certification bodies.
Electronics & Electrical Product Certification
When electronics & electrical products enter different countries, they face entirely different certification systems — EU CE, US FCC/UL, Japan PSE, Korea KC, China CCC, international CB, and more. TMC LAB performs pre-compliance and pre-testing within its CNAS / CMA / A2LA accredited scope, its own CBTL issues CB reports, and then it liaises with bodies holding issuing qualifications to complete formal certification — making "test once, use everywhere" a reality.
Main Certification Items & Reference Standards
| Certification Item | Applicable Market | Core Reference Standards | Starting Price / Timeline Reference |
|---|---|---|---|
| CE（LVD+EMC+RED+RoHS+ErP） | European Union | EN 62368-1 / EN 55032 / EN 55035 / RED 2014/53/EU | CE set from 5,000 · 5-7 business days |
| UKCA | United Kingdom | BS EN Series + UK Designated Standards | from 1,500 · 5-7 business days |
| GS / TÜV | Germany | ProdSG Product Safety Act + Factory Inspection | from 4,500 · 4-6 weeks |
| FCC（SDOC / ID） | United States | FCC Part 15B / 15C | from 1,500 / 4,000 · 5-7 / 15-20 business days |
| UL / ETL / CSA | North America | UL 62368-1 etc. + Factory Inspection | Negotiable · 4-8 weeks |
| CCC | China | GB 4943.1 / GB 17625.1 | 13,000-22,000 + Agent · 3-6 weeks |
| PSE (Diamond / Circle) | Japan | Electrical Appliances and Materials Safety Act | from 3,500 · 5-7 / 4-6 weeks |
| KC / KCC | South Korea | KC Safety + KCC EMC | from 3,500 · 5-7 / 4-6 weeks |
| RCM / SAA | Australia & New Zealand | AS/NZS Standards | from 1,500 · 5-7 business days |
| CB Scheme | International, 56 Countries | IECEE CB Scheme (In-house CBTL for IT/AV) | from 5,000 · 15-20 business days |
Match by Product Type
| Product Type | Main Certifications | Mandatory Items |
|---|---|---|
| Home Appliances / Small Appliances | CCC · CE · UL/ETL · PSE · KC · SAA | RoHS / REACH (EU) |
| Audio-Visual & IT Equipment | CCC · CE-RED · FCC ID · VCCI · TELEC · SRRC | 62368-1 Safety + EMC + Wireless |
| Lighting & LED | CCC · CE · UL 1598 · DLC · ErP | Photobiological Safety EN 62471 + Energy Efficiency |
| Wireless & IoT | CE-RED · FCC ID · TELEC · SRRC · KCC · IC ID | EMC + SAR + Full Wireless RF Set |
| Batteries & Power Banks | UN38.3 · IEC 62133 · UL 2054/1642 · EU Battery Regulation | UN38.3 + IEC 62133 + MSDS |
| Electric Mobility | CE · FCC SDOC · UL 2849 · KC | Battery UN38.3 + Complete-Vehicle EMC/LVD |
| Children's Toys / Products | CCC · EN 62115 · CPSIA · ASTM F963 | Chemical & Environmental + Safety + Labeling |
| Wires & Cables | CCC · CE-CPR · UL · VDE | CPR Fire Class (Aca-B1ca) |
Service Process
- 1Requirement AssessmentClarify target market, product category and applicable regulations; free output of certification pathway, timeline and budget
- 2Plan CustomizationDevelop test plan, sample list, technical documentation list and key component compliance requirements
- 3Testing & RemediationPre-testing first to expose hidden risks, then formal testing; actionable remediation plans for failed items, closed-loop until full compliance
- 4Certification & MaintenanceLiaise with issuing bodies for certification applications, factory inspection coaching, annual certificate audits and market surveillance response
TMC LAB provides full-process services from R&D pre-compliance and plan planning to formal certification liaison: our own CBTL issues CB reports — one test, converted into certificates for multiple countries; formal certification is performed by bodies with issuing qualifications, while we handle pathway planning, remediation support and liaison with certification bodies — no repeated rework on the same line.
Cross-Border Compliance & Global Market Access
The same electronics & electrical product entering different countries faces entirely different regulatory systems, certification pathways and technical barriers. TMC LAB combines a global regulatory database, local testing and international mutual recognition (CB / ILAC) to provide cross-border e-commerce and export manufacturers with one-stop compliance solutions from market access assessment and sample testing to technical documentation and certification & inspection.
Key Target Markets & Access Requirements
| Target Market | Mandatory / Common Certifications | Applicable Products | Timeline Reference |
|---|---|---|---|
| Europe (EU + UK) | CE（LVD/EMC/RED/RoHS/ErP）+ UKCA | All categories of electronics & electrical | CE set, 5-7 business days |
| North America (US + Canada) | FCC / IC · UL / ETL / CSA · California 65 | Wireless, home appliances, IT, lighting | FCC 5-7 business days · UL 4-8 weeks |
| Asia-Pacific (Japan, Korea, Australia, India) | PSE · KC/KCC · RCM/SAA · BIS/CRS | Home appliances, wireless, components | 5-7 business days ~ 6-10 weeks |
| Middle East & Africa | SASO/SABER · ECAS · NRCS · SONCAP | Lighting, home appliances, building materials | 5-7 business days (customs clearance type) |
| Latin America | INMETRO · NOM · S-Mark · Anatel | Home appliances, wireless, charging devices | 8-12 weeks (local agent required) |
| Eurasian Economic Union | EAC (TR CU Technical Regulations) | Home appliances, wireless, machinery | 4-8 weeks (local representative required) |
Cross-Border E-Commerce Platform Compliance
| Platform | Mandatory Compliance Documents | Report Type |
|---|---|---|
| Amazon (US) | FCC (FCC ID for wireless) / UL / CPSIA / California 65 | Third-party test report |
| Amazon (EU) | CE / RoHS / REACH (Packaging Directive) | Third-party test report |
| Amazon (Japan) | PSE (Diamond/Circle) / TELEC (Wireless) | Third-party test report |
| SHEIN / TEMU / AliExpress | CE / FCC / RoHS / California 65 | Third-party test report |
| Walmart / eBay / JD Worldwide | Corresponding Certifications by Country | Third-party test report |
Service Process
- 1Market Access AssessmentLock in the target market and sales platform, map out regulatory differences and applicable catalogs, and output compliance pathways and upfront risks
- 2Customized Testing PlanPlan a multi-country test combination in one go, prioritizing the CB system to reduce duplicate sample submission, with clear sample and document lists
- 3Testing & RemediationPre-testing locates hard flaws in radiation, safety, temperature rise, etc., with remediation design provided and closed-loop until compliance
- 4Certification & Customs Clearance SupportLiaise with issuing bodies and local representatives to complete registration, factory inspection coaching, pre-shipment inspection and certificate maintenance
When listings are taken down, listings frozen, goods detained at customs, or supplementary reports requested, TMC LAB issues test reports in as fast as 5-7 business days, covering Amazon, SHEIN, TEMU, AliExpress and other major cross-border platforms; formal certification and local licensing are completed by authorized bodies and local representatives, while we handle full liaison and remediation support.
From R&D Pre-Compliance to Certification Delivery, Completed on One Line
What TMC LAB provides isfull-process compliance services: first, accurately pre-test the required items for the target market, using measured data to expose design risks; then help you map out the compliance path, provide remediation plans, and complete formal certification through bodies with issuing qualifications. Pre-compliance, remediation and certification liaison are all completed on the same line — no need for you to find new people or pay twice.
Not Sure Which Type of Testing You Need?
Tell us your product information and target market, and a technical consultant will select the minimum necessary test combination for you.
